STEAM FILTER HOUSINGS – SCK SERIES (70YY)

Our rugged, cost effective design is a simple solution to improve overall steam quality. The SCK Series can remove large amounts of liquids and solid contamination. The standard 70YY disposable cartridge is rated at 98% removal of 0.01 micron liquids and solids. An automatic steam trap is recommended to constantly drain condensation.

Re-cleanable stainless steel sintered filter elements are also available, designated (01, 03, 10, 25, 50, 100 & 200) with a 98% removal rating. Grade 25 is recommended for removal of fine pipe scale and bulk condensate. The 25 micron provides high performance while allowing generous flow through the system.

Features:

  • 316L Stainless Steel Construction
  • Cost Effective Rugged Design
  • Remove Liquid & Solid Contamination
  • Re-cleanable SS Elements Available
  • Prevent Wet Packs And Stained Instruments
  • No Tools Needed During Service

Applications:

  • Hospital Autoclave Protection C.I.P. Systems
  • Excellent Alternative To Balston 23/75R
  • 51-460-70YY Replaces Balston’s 200-75-R Element

At the heart of our filter products is the filter element. Choosing the correct element insures proper results for your specific application:

Disposable Microfiber Elements

Our 51-460-70YY steam elements are constructed of 100% borosilicate microfiber providing up to 98% efficiency against 0.01 microns.  We utilize a mixture of proprietary binders which allows the element to function at temperatures above 500°F (260°C). It is important to note that the 70YY elements should be changed-out every six to eight weeks, and that solid particles will shorten their service life by reducing surface area which is needed to remove liquid droplets.  Every application is unique and must be monitored to ensure proper change out frequency. The particles will also increase the pressure drop, which can lead to element rupture. For added security, the element is caged with inner and outer stainless steel support cores to stabilize the element as pressure and temperature swings occur.

Stainless Steel 5-Layer Mesh Elements

Five layers of surface area / depth for removing solids and liquids. The rigid durable construction provides precise pore distribution, flow permeability, and low initial pressure drop. Standard microns available: 0.5, 1, 3, 10, 25, 50, 100, and 200.

For Technical Information Please Consult The Factory. Scroll Down for Flow Rates.

TECHNICAL INFORMATION
Housing Model150SCK151SCK152SCK
Port Size (NPT)1 1/2”
Drain Type (NPT)1/4”1/4”1/4”
Maximum Pressure (psig)150015001500
Internal Volume (cc)150015001500
Maximum Temp. -Buna-N (250ºF)BN150BN150BN150
Maximum Temp. -EPDM (300ºF) StandardGE150GE150GE150
Maximum Temp. -Viton (400ºF)GV150GV150GV150
Maximum Temp. -Silicone (450ºF)GS150GS150GS150
Maximum Temp. -Kalrez (600ºF)KZ150KZ150KZ150
Weight of Housing (lbs)222222
Principle Dimensions: (inches)
Center Of Port To Head1.51.851.85
Head Diameter4.524.524.52
Overall Length14.7515.5815.58
Element Removal Clearance9.059.059.05
Filter Element Codes:
Disposable Element51-213-70YY51-213-70YY51-213-70YY
Stainless Steel Element (1)SS-51-213-□SS-51-213-□SS-51-213-□
Materials Of Construction: (2)
Head & Internals316LSS316LSS316LSS
Bowl316LSS316LSS316LSS
O-Rings (Standard)EPDMEPDMEPDM
Accessories:
Mounting BracketMBSS150MBSS150MBSS150

Notes:
(1) Replace ‘□’ with micron required 01, 03, 10, 25, 50, 100, 200, e.g. SS-51-213-25T
(2) Material abbreviations, 316LSS = 316L Stainless Steel
.

STEAM FLOW RATES FOR DISPOSABLE 51-460-70YY
Pressure (PSIG)Flow, lbs/hr. At Indicated Pressure Drop
2 PSIG5 PSIG10 PSIG
53264128
104080160
154896192
2054108216
3070140280
4083166332
5099198396
60114228456
70127254508
75134268536
80141282564
90156313627
95164330661
100173348697
105182367735
110192381775
115202408817
120213430861
125224453908

Our rugged, cost effective design is a simple solution to improve overall steam quality. The SCK Series can remove large amounts of liquids and solid contamination. The standard 70YY disposable cartridge is rated at 98% removal of 0.01 micron liquids and solids. An automatic steam trap is recommended to constantly drain condensation.

Re-cleanable stainless steel sintered filter elements are also available, designated (01, 03, 10, 25, 50, 100 & 200) with a 98% removal rating. Grade 25 is recommended for removal of fine pipe scale and bulk condensate. The 25 micron provides high performance while allowing generous flow through the system.

TECHNICAL INFORMATION
Housing Model (1)160SCK161SCK162SCK
Port Size (NPT)1 1/2”
Drain Type (NPT)1/4”1/4”1/4”
Maximum Pressure (psig)150015001500
Internal Volume (cc)270027002700
Maximum Temp. -Buna-N (250ºF)BN160BN160BN160
Maximum Temp. -EPDM (300ºF) StandardGE160GE160GE160
Maximum Temp. -Viton (400ºF)GV160GV160GV160
Maximum Temp. -Silicone (450ºF)GS160GS160GS160
Maximum Temp. -Kalrez (600ºF)KZ160KZ160KZ160
Weight of Housing (lbs)383838
Principle Dimensions: (inches)
Center Of Port To Head1.51.851.85
Head Diameter4.524.524.52
Overall Length24.525.1225.12
Element Removal Clearance17.8717.8717.87
Filter Element Codes:
Disposable Element51-460-70YY51-460-70YY51-460-70YY
Stainless Steel Element (2)SS-51-460-□SS-51-460-□SS-51-460-□
Materials Of Construction: (3)
Head & Internals316LSS316LSS316LSS
Bowl316LSS316LSS316LSS
O-Rings (Standard)EPDMEPDMEPDM
Accessories:
Mounting BracketMBSS150MBSS150MBSS150

Notes:
(1) The 160SCK Series is now manufactured with a two piece bowl which makes the housings weld free
(2) Replace ‘□’ with micron required 01, 03, 10, 25, 50, 100, 200, e.g. SS-51-460-25T
(3) Material abbreviations, 316LSS = 316L Stainless Steel

For Technical Information Please Consult The Factory. Scroll Up for Flow Rates.