Features
- Completely Disposable
- Blue Transparent Nylon & Virgin Kynar Body
- Four Body Sizes
- Wide Range of Adsorbents (DIA)
- No Handling of Loose Adsorbents
Applications
- HVAC Purification
- Analyzer & Sensor Protection
- Low Cost Scrubbers
- Last Chance Purifier
- Zero Air Gas Calibration
Our Disposable In-Line Adsorbers consist of nylon or kynar bodies filled with granular adsorption material with integral inlet and outlet filter pads. For best results longer contact time will increase the efficiency of the desiccant media providing a more effective adsorber. A wide choice of adsorbents permits the selective removal of vapors from air and other gases. Desiccant choices are listed on page 4.
Our Disposable In-Line Adsorbers consist of granular adsorbent material ultrasonically welded into a see-through nylon or kynar body. Integral filter pads eliminate adsorbent migration. Four sizes are available, containing from 6cc up to 120cc of adsorbent.
-
Standard OEM Size Filled With Media (DIA-BNxx)
Our standard DIA-BN series is by far the most commonly used size of DIA. DIA’s should be used only when small quantities of vapor are to be removed. Whether being used in an OEM cabinet, emission bench, or zero air applications this little gem is an economical workhorse.
Replace “xx” with grade required CC, 4A, 13X, SG, DR, MB, PP, HO, SB, CS, e.g. DIA-BNCC
Technical Information
- 1/4" Inlet / Outlet
- 11.5cc of Volume
- 230ºF Maximum Temp. At 0 PSIG
- 125 PSIG of Maximum Pressure at 110ºF
- 100% Grilamid TR 55 Blue Nylon body
- Specify Adsorbent
- Standard Gas Flow at 100 PSIG is 4.2 SCFM
-
Standard OEM Size For Chemical Compatibility Filled w/ Media (DIA-BKxx)
This series of DIA assemblies is constructed of virgin white kynar for corrosive applications.
Replace “xx” with grade required CC, 4A, 13X, SG, DR, MB, PP, HO, SB, CS, e.g. DIA-BKCCTechnical Information
- 1/4" Inlet / Outlet
- 11.5cc of Volume
- 230°F Maximum Temp. At 0 PSIG
- Virgin White Kynar body
- Specify Adsorbent
- Standard Gas Flow at 100 PSIG is 4.2 SCFM
-
Miniature OEM Size Filled With Media (DIA-MNxx)
The DIA-MN, mini DIA was designed specifically as a final last chance adsorber for critical equipment with a small footprint. They are ideally used for HVAC / Pneumatic temperature control protection.
Replace “xx” with grade required CC, 4A, 13X, SG, DR, MB, PP, HO, SB, CS, e.g. DIA-MNCCTechnical Information
- 1/4" Inlet / Outlet
- 6cc of Volume
- 230ºF Maximum Temp. At 0 PSIG
- 125 PSIG of Maximum Pressure at 110ºF
- 100% Grilamid TR 55 Blue Nylon body
- Specify Absorbent
- Standard Gas Flow at 100 PSIG is 2.1 SCFM
-
Intermediate OEM High Flow DIA w/ Media (DIA-INxx)
Our intermediate range is utilized where higher vapor holding capacity is required. Larger volume for longer service life.
Replace “xx” w/media required CC, 4A, 13X, SG, DR, MB, PP, HO, SB, CSTechnical Information
- 1/4" Inlet / Outlet
- 50cc of Volume
- 230ºF Maximum Temp. At 0 PSIG
- 100 PSIG of Maximum Pressure at 110ºF
- 100% Grilamid TR 55 Blue Nylon body
- Specify Adsorbent
- Standard Gas Flow at 100 PSIG is 10.0 SCFM
-
Large OEM Maximum Flow DIA w/ Media (DIA-LNxx)
Our largest DIA is commonly specified where extreme amounts of vapor is present or for remote sites.
Larger volume for longer service life.
Replace “xx” with grade required CC, 4A, 13X, SG, DR, MB, PP, HO, SB, CSTechnical Information
- 1/4" NPT Inlet / Outlet or 1/2" Slip On Connection
- 120cc of Volume
- 230ºF Maximum Temp. At 0 PSIG
- 100 PSIG of Maximum Pressure at 110ºF
- 100% Grilamid TR 55 Blue Nylon body
- Specify Adsorbent
- Standard Gas Flow at 100 PSIG is 17.0 SCFM
-
Large OEM High Flow DIA for Chemical Compatibility (DIA-LKxx)
The DIA-LK assemblies are constructed of black kynar for corrosive applications.
Replace “xx” with grade required CC, 4A, 13X, SG, DR, MB, PP, HO, SB, CSTechnical Information
- 1/4" NPT Inlet / Outlet or 1/2" Slip On Connection
- 120cc of Volume
- 230ºF Maximum Temp. At 0 PSIG
- 100 PSIG of Maximum Pressure at 110ºF
- Black Kynar body
- Specify Adsorbent
- Standard Gas Flow at 100 PSIG is 17.0 SCFM
