Stainless Steel Process High Pressure Filter Housings

Our Gas and Liquid Process Filters protect equipment from sample impurities by removing solids and liquids from gases up to 99.999% efficiency at 0.01 micron. This series of filters is also ideal to use in liquid sample process applications by simply employing our pleated liquid elements, or stainless steel elements. A 1 micron efficiency can be reached in liquids with the aforementioned elements.

To satisfy the extreme wide range of requirements for process sample filters, we supply a complete line of filter elements in stainless steel, polypropylene, and other corrosion-resistant materials. A choice of high efficiency borosilicate microfiber filter elements, which are inert to most liquids and gases, are also offered.

Our 150 and 160 series of high-pressure 316L stainless steel filter housings offer exceptional value and performance. The threaded head to bowl connection with captured o-ring provides positive sealing even in very corrosive and demanding applications. The 3000 PSIG rating covers the majority of gas and liquid applications.

Features

  • Filters Gases & Liquids
  • 316L Stainless Steel
  • 3,000 PSIG / 400°F – Standard
  • 6,000 PSIG & Flanges Available
  • 3-Port Housings For Coalescing
  • Particulate Or Bypass Filtration

Applications

  • Chemical Processing
  • Aerospace Filtration
  • Booster Compressors
TECHNICAL INFORMATION
Housing Model150HP151HP152HP
Port Size (NPT)1”"1 1/2”"2”"
Drain Type (NPT)1/4”"1/4”"1/4”"
Maximum Pressure (psig)300030003000
Internal Volume (cc)150015001500
Maximum Temp. -Buna-N (250ºF)BN150HPBN150HPBN150HP
Maximum Temp. -EPDM (300ºF)GE150HPGE150HPGE150HP
Maximum Temp. -Viton (400ºF) StandardGV150HPGV150HPGV150HP
Maximum Temp. -Silicone (450ºF)GS150HPGS150HPGS150HP
Maximum Temp. -Kalrez (600ºF)KZ150HPKZ150HPKZ150HP
Weight of Housing (lbs)343434
Principle Dimensions: (inches)
Center Of Port To Head1.181.181.61
Head Diameter4.334.334.53
Overall Length14.514.515.29
Element Removal Clearance9.059.059.05
Filter Element Codes: (1)
Disposable Element51-230-□51-230-□51-230-□
Stainless Steel ElementSS-51-230-□SS-51-230-□SS-51-230-□
PEL ElementPEL-51-230-□PEL-51-230-□PEL-51-230-□
PTFE ElementPT-51-230-□PT-51-230-□PT-51-230-□
Materials Of Construction: (2)
Head & Internals316LSS316LSS316LSS
Bowl316LSS316LSS316LSS
O-Rings (Standard)VitonVitonViton
Accessories:
Mounting BracketMB150HPMB150HPMB150HP
Support CoreSC150SC150SC150
FLOW RATE IN SCFM FOR ABOVE ASSEMBLIES
WITH GRADE 50CS (3) or 70CS (4)
Air Line Pressure150HP Series
(PSIG)
50CS70CS
153886
3056127
6093210
100151343
150209470
250319725
5006501450
150018974152
300034117474

Notes:
(1) Replace ‘□’ with grade required, e.g. 51-230-50CS, PT-51-230-03
(2) Material abbreviations, 316LSS = 316L Stainless Steel
(3) Flow rates for Grade 50CS rated at 99.99% against 0.01 micron
(4) Flow rates for Grade 70CS rated at 95% against 0.01 micron
.

TECHNICAL INFORMATION
Housing Model (1)160HP161HP162HP
Port Size (NPT)1”"1 1/2”"2”"
Drain Type (NPT)1/4”"1/4”"1/4”"
Maximum Pressure (psig)300030003000
Internal Volume (cc)270027002700
Maximum Temp. -Buna-N (250ºF)BN160HP/2BN160HP/2BN160HP/2
Maximum Temp. -EPDM (300ºF)GE160HP/2GE160HP/2GE160HP/2
Maximum Temp. -Viton (400ºF) StandardGV160HP/2GV160HP/2GV160HP/2
Maximum Temp. -Silicone (450ºF)GS160HP/2GS160HP/2GS160HP/2
Maximum Temp. -Kalrez (600ºF)KZ160HP/2KZ160HP/2KZ160HP/2
Weight of Housing (lbs)575757
Principle Dimensions: (inches)
Center Of Port To Head1.181.181.61
Head Diameter4.334.334.53
Overall Length23.9823.9824.77
Element Removal Clearance19.3717.8717.87
Filter Element Codes: (2)
Disposable Element51-476-□51-476-□51-476-□
Stainless Steel ElementSS-51-476-□SS-51-476-□SS-51-476-□
PEL ElementPEL-51-476-□PEL-51-476-□PEL-51-476-□
PTFE ElementPT-51-476-□PT-51-476-□PT-51-476-□
Materials Of Construction: (3)
Head & Internals316LSS316LSS316LSS
Bowl316LSS316LSS316LSS
O-Rings (Standard)VitonVitonViton
Accessories:
Mounting BracketMB150HPMB150HPMB150HP
Support CoreSC160SC160SC160
FLOW RATE IN SCFM FOR ABOVE ASSEMBLIES
WITH GRADE 50CS (4) or 70CS (5)
Air Line Pressure160HP Series
(PSIG)
50CS70CS
156487
30125143
60160221
100256354
150354488
250546754
50010911508
150032484466
300058478004

Notes:
(1) The 160 Series is now manufactured with a two piece bowl which makes the housings weld free
(2) Replace ‘□’ with grade required, e.g. 51-476-50CS, PT-51-476-03
(3) Material abbreviations, 316LSS = 316L Stainless Steel
(4) Flow rates for Grade 50CS rated at 99.99% against 0.01 micron
(5) Flow rates for Grade 70CS rated at 95% against 0.01 micron

At the heart of our filter products is the filter element. Choosing the correct element insures proper results for your specific application:

Disposable Microfiber Elements

Disposable Microfiber Elements are most commonly used since they offer exceptional filtration, high flows with minimal pressure drops, and excellent chemical compatibility. These are ideal for use in sample conditioning, instrumentation, CNG, and Emission/Environmental service.

  • For Coalescing (liquid removal) and particle collection use our grade “CS”. We recommend starting with the 70CS which is rated at 95% efficient at 0.01 micron which provides outstanding filtration, at high flow rates.
  • For Particle removal only use grade “K”. We recommend starting with the 70K which is rated at 95% efficient at 0.01 micron which provides outstanding filtration, at high flow rates.
  • For Particulate removal above 300°F (150°C) use grade “S”.

Stainless Steel 5-Layer Mesh Elements

Stainless steel elements (SS) are designed for the filtration of heavily contaminated gas samples, CNG, and liquid streams since they are recleanable by back flushing or ultrasonic cleaning. Standard microns available: 0.5, 1, 3, 10, 25, 50, 100, and 200.

Sintered PTFE

Sintered PTFE elements are used where only pure PTFE may contact the sample. They should be used in our PTFE series of housings based on the stainless steel models. Model 122P, 122PG, 130P, 130PG, 132P, 132PG, 142P.

Standard microns available: 3,10, and 25.

Sintered Polyethylene (PEL)

Sintered polyethylene elements (PEL) are used only in non-corrosive applications to remove bulk contaminates. Standard micron sizes available: 10, 25, and 75.

  • Ideal Compressed Natural Gas Filter
  • NACE Complaint MR-01-75 For Sour Service
  • Mechanical Seal Filter
  • Seal Gas Filtration
  • Accepts Microfiber, Stainless Steel, PTFE, & PEL Filter Elements

Our wide range of filter element materials and micron sizes allow multiple uses for these housings:

Gas Service Applications:Liquid Service Applications:
Coalescing and/or ParticulateParticulate
CNG FiltrationHigh Flow Sample Service
Blow Molding EquipmentFuel Filtration
Food Plant Caustic ServiceSolvents / Coolants
High Pressure Compressor ServiceCryogenic Service
General High Pressure Air ServiceCorrosive Environmental Service
Adsorption Cartridges; Carbon, Silica Gel, 13X, etc.Lubricants
Pleated for High Dirt Holding CapacityC.I.P. Service (Clean In Place)