Particulate Filter Elements

Our Microfiber disposable filter elements are manufactured from precise mixtures of borosilicate glass microfibers to the very highest standards. These elements offer exceptional filtration efficiency at very low-pressure drops and being +90% void volume give very long service life.

The elements are bonded to impart high strength and eliminate fiber shedding. The choice between the different binders available will depend upon the application. Each type of element is available in a wide range of efficiencies covering the complete range from coarse bulk contamination removal (grade 80) to essentially complete removal of sub-micron contaminates.

Features:

  • High Efficiency Coalescing
  • Completely Disposable
  • Suitable For Corrosive Applications
  • High Flow Rates, Low Pressure Drops
  • Custom Sizes Available
  • Suitable For Highly Adsorbent Gases
  • Gas Or Liquid Service
  • Complete Removal Of Sub-Micron Contaminants

Applications:

  • Coalescing Filtration
  • Natural Gas
  • Corrosive Gas Filtration
  • Off-Shore
  • Instrumentation
  • Particulate Filtration
  • Natural Gas Vehicle
  • Analytical

Our disposable particulate filter elements are 100% borosilicate glass.  This borosilicate matrix is ideal for analytical applications, since it exhibits low pressure drops while providing the utmost efficiency while cleaning, but not altering the sample.  By using different binders, we can offer elements for high temperatures and corrosive applications. If you have extremely high concentrations of particulate, we recommend using a C type element and running it with an outside to inside flow direction, thus using the depth for more surface area.


K GradeElements are specified for particulate removal where corrosive gases are to be filtered as they have excellent chemical resistance. They are also used when highly reactive gases are being analyzed since they exhibit very low levels of adsorption. The borosilicate microfiber provides relatively high flow rates with low pressure drops which is critical in any analytical application.  The PVDF binder creates a non-reactive surface which allows accurate sample analysis.
S GradeElements are completely inorganic and are used to filter particulate at temperatures from 300°F to 900°F. The S21-R Type are used in diesel emission applications.
ET GradeElements are hydrocarbon-free filters developed to remove particulate for automotive emission testing up to 400°F.
C GradeElements are specifically designed for the removal of liquid aerosols and particulate from gases in both corrosive and non-corrosive applications. The C type element is constructed of two layers of borosilicate microfiber. The first (inner layer) is comprised of very fine fiber and is more densely packed to capture microscopic aerosols. The outer layer is made up of slightly larger fibers which allow the captured liquids to pass through the depth of the wall and drain off the filter element. This two-layer design is critical to proper coalescing, and borosilicate microfiber is best suited for this function. Coalescing elements should always flow from the inside to the outside of the element so that proper draining of liquids can occur. These elements will simultaneously collect particulates. The C grade element has an off-white toasted color due to the fluorocarbon resin binder. This is normal of does not affect the performance of the element.
CS GradeElements are designed for high temperature coalescing applications good to 900°F. Excellent for heavy coalescing. These elements mimic the C grade, only with a silica binder rather than a PVDF one.
RC GradeElements are designed for high pressure coalescing applications. These elements consist of a borosilicate glass inner layer sandwiched between two, rayon/phenolic layers. The reinforced inner/outer layers provide excellent strength.
Standard GradeElements are suitable for all particulate removal applications in non-corrosive gases and liquids. The coarsest grade that will adequately protect the application should be chosen, as this will result in the most economical solution to the contamination problem.
L GradeElements have a hydrophobic binder, making them ideal for applications where sterilization is required.
TECHNICAL INFORMATION
Element GradeType of ApplicationMaximum Temp.Efficiency at 0.01 microns. Suffix Grade designation:
Binder Type(°F)99.99998%99.9999%99.99%99.50%+95%*75%
K GradeParticulate
PVDF Fluorocarbon ResinAnalytical30030K40K50K60K70K80K
S GradeEmissions
S21-R GradeStack Gas
Silica Inorganic Resin90030S40S50S60S70S80S
ET Grade
PVDF ProprietaryEmissions40030ET40ET50ET60ET70ET80ET
C GradeCoalescing
PVDF Fluorocarbon Resin-Instrumentation30030C40C50C60C70C80C
CS Grade
Silica Inorganic ResinHigh Liquid90030CS40CS50CS60CS70CS80CS
RC GradeHeavy Particle &
Phenolic ResinCoalescing250N/AN/ARC1N/ARCN/A
Standard Grade
Epoxy Ester ResinParticulate Only300304050607080
L GradeSterile Air
Silicone Resin Applications400N/A40LN/A60LN/AN/A
Notes: (*)The 70 grade elements are formulated to give 95% efficiency against 0.01 microns while exhibiting a low pressure drop.  We advise starting with this grade of element for best results.  For example, if you have a coalescing application, then use the 70C grade, or if you need protection on your hot stack gas analyzer, we recommend using the 70S, because this efficiency rating offers the best flow rates with uncompromised efficiency.

Dimensions:
All disposable filter elements have a part number arranged with three figures, e.g. 25-64-70C.
The first part refers to the inside diameter, the second figure refers to the overall length and the third part refers to the grade designation. Replace the ‘XX’ in the part numbers with the grade designation. Please enquire with specific requirements.

Example Part Number: 25-178-70C

Below is list of standard size elements that we offer:

12-25-xx
12-32-xx
12-57-xx
12-83-xx
25-51-xx
25-64-xx
25-127-xx
25-178-xx
38-58-xx
38-152-xx
51-89-xx
51-230-xx
51-476-xx
63-762-xx

We are able to produce elements with the inner diameters from 0.27” (7mm) to 3.94” (100mm), and lengths from 0.3.94” (10mm) to 39.4” (1000mm).