Disposable In-line Adsorbers

Our Disposable In-Line Adsorbers consist of nylon or kynar bodies filled with granular adsorption material with integral inlet and outlet filter pads. For best results longer contact time will increase the efficiency of the desiccant media providing a more effective adsorber. A wide choice of adsorbents permits theselective removal of vapors from air and other gases. Desiccant choices are listed on page 4.

Our Disposable In-Line Adsorbers consist of granular adsorbent material ultrasonically welded into a see-through nylon or kynar body. Integral filter pads eliminate adsorbent migration. Four sizes are available, containing from 6cc up to 120cc of adsorbent.

Features

  • Completely Disposable
  • Blue Transparent Nylon
  • Virgin Kynar Body
  • Four Body Sizes
  • Wide Range Of Adsorbents (DIA)
  • No Handling Of Loose Adsorbents
  • Ideal “Last Chance” Protection

Applications

  • HVAC Purification
  • Analyzer & Sensor Protection
  • Low Cost Scrubbers
  • Last Chance Air Purifier
  • Zero Air Gas Calibration

Standard OEM Size Filled With Media (DIA-BN__) *add media required
Our standard DIA-BN series is by far the most commonly used size of DIA. DIA’s should be used only when small quantities of vapor are to be removed. Whether being used in an OEM cabinet, emission bench, or zero air applications this little gem is an economical workhorse. Replace “__” with grade required CC, 4A, 13X, SG, DR, MB, PP, HO, SB, CS, e.g. DIA-BNCC

TECHNICAL INFORMATION

  • 1/4” Inlet / Outlet
  • 11.5cc of Volume
  • 230°F Maximum Temp. At 0 PSIG
  • 125 PSIG of Maximum Pressure at 110°F
  • 100% Grilamid TR 55 Blue Nylon body
  • Specify Adsorbent
  • Standard Gas Flow at 100 PSIG is 4.2 SCFM

 

 

 

Standard OEM Size For Chemical Compatibility Filled w/ Media (DIA-BK__)
This series of DIA assemblies is constructed of virgin white kynar for corrosive applications. Replace “__” with grade required CC, 4A, 13X, SG, DR, MB, PP, HO, SB, CS, e.g. DIA-BKCC

TECHNICAL INFORMATION

  • 1/4” Inlet / Outlet
  • 11.5cc of Volume
  • 230°F Maximum Temp. At 0 PSIG
  • 125 PSIG of Maximum Pressure at 110°F
  • Virgin White Kynar body
  • Specify Adsorbent
  • Standard Gas Flow at 100 PSIG is 4.2 SCFM

 

 

Miniature OEM Size Filled With Media (DIA-MN__) *add media required
The DIA-MN, mini DIA was designed specifically as a final last chance adsorber for critical equipment with a small footprint. They are ideally used for HVAC / Pneumatic temperature control protection. Replace “__” with grade required CC, 4A, 13X, SG, DR, MB, PP, HO, SB, CS, e.g. DIA-MNCC

TECHNICAL INFORMATION

  • 1/4” Inlet / Outlet
  • 6cc of Volume
  • 230°F Maximum Temp. At 0 PSIG
  • 125 PSIG of Maximum Pressure at 110°F
  • 100% Grilamid TR 55 Blue Nylon body
  • Specify Adsorbent
  • Standard Gas Flow at 100 PSIG is 2.1 SCFM

 

 

Intermediate OEM High Flow DIA w/ Media (DIA-IN__) *add adsorbent required
Our intermediate range is utilized where higher vapor holding capacity is required. Larger volume for longer service life. Replace “__” w/media required CC, 4A, 13X, SG, DR, MB, PP, HO, SB, CS

TECHNICAL INFORMATION

  • 1/4” Inlet / Outlet
  • 50cc of Volume
  • 230°F Maximum Temp. At 0 PSIG
  • 100 PSIG of Maximum Pressure at 110°F
  • 100% Grilamid TR 55 Blue Nylon body
  • Specify Adsorbent
  • Standard Gas Flow at 100 PSIG is 10.0 SCFM

 

 

Large OEM Maximum Flow DIA w/ Media (DIA-LN__) *add adsorbent required
Our largest DIA is commonly specified where extreme amounts of vapor is present or for remote sites. Larger volume for longer service life. Replace “__” with grade required CC, 4A, 13X, SG, DR, MB, PP, HO, SB, CS

TECHNICAL INFORMATION

  • 1/4” NPT Inlet / Outlet or 1/2” Slip On Connection
  • 120cc of Volume
  • 230°F Maximum Temp. At 0 PSIG
  • 100 PSIG of Maximum Pressure at 110°F
  • 100% Grilamid TR 55 Blue Nylon body
  • Specify Adsorbent
  • Standard Gas Flow at 100 PSIG is 17.0 SCFM

 

 

Disposable In-Line Adsorbers – Flow Rate Charts

GAS FLOW RATES – DIA-MN□ – MINI
DIA Model NumberGas Flow In SCFM At Stated PSIG With 1.5 PSID
1.520406080100125
DIA-MN0.30.61.0
1.0
1.72.12.8
GAS FLOW RATES – DIA-BN□ – STANDARD
DIA Model NumberGas Flow In SCFM At Stated PSIG With 1.5 PSID
1.520406080100125
DIA-BN or BK0.61.32.0
2.73.54.25.7
GAS FLOW RATES – DIA-IN□ – INTERMEDIATE
DIA Model NumberGas Flow In SCFM At Stated PSIG With 1.5 PSID
1.520406080100
DIA-IN1.53.45.3
6.68.310.0
GAS FLOW RATES – DIF-LN□ – LARGE
DIF Model NumberGas Flow In SCFM At Stated PSIG With 1.5 PSID
1.520406080100
DIA-LN or LK2.45.17.9
11.014.017.0
AdsorbentCodePrinciples
Activated CarbonCCAdsorption of hydrocarbons and other organic vapors Zero Air Calibration
Molecular Sieve 4A4AAdsorption of CO2, NH3, H2S, SOX
Molecular Sieve 13X13XAdsorption of CO2, NH3, H2S, SOX, aromatics, amines
Silica GelSGAdsorption of water vapor
Drierite Anhydrous Calcium SulfateDRAdsorption of water vapor
Mixed BasesMBRemoval of acidic gases, CO2, SOX, NOX, HCI
Potassium PermanganatePPRemoval of SOX, Hg, and other acidic gases
HopcaliteHORemoval of CO by catalytic oxidation to CO2
Sodium BicarbonateSBAcid Neutralizer
Copper SulfateCSRemoval of ammonia